CROSS SECTIONAL LINE DRAWING
ThermoSpan EPS
- EPS Core
- ThermoSpan EPS consists of a 0.59mm profiled roofing sheet bonded to an EPS core with a ceiling panel sheet bonded to the underside. ThermoSpan EPS does have fire retardant properties but is not fire rated.
- Codemark Certified
- ThermoPanel is Codedmark Certified. Please refer to Codemark certification for scope and limitations of use of ThermoSpan.
- MINIMUM PITCH:
- 3 degrees
- MANUFACTURED:
- Auckland, available nationwide
- ORIENTATION:
- Roof and wall cladding
- SHEET LENGTH:
- Lengths from 2m-24m. Please note lengths are restricted by transportation to site. If sheet lengths longer than 15m are required, please check with Metalcraft Insulated Panels.
- LAPS:
- End lapped upto 16m then step joints required
Downloads
Download AllInstallation details available for download in PDF, DWG, DXF & RVT files
Loadspan Tables and Product Information
Commercial Roof Details
Codemark Installation Guide
Residential Roof Details
Codemark Specifications
Product Technical Statement upto 2.5Kpa
Product Technical Statement above 2.5Kpa
Metalcraft Codemark Designer Declaration
Codemark Care and Maintenance
Codemark Certificate
Metalcraft Codemark Installation Declaration
Masterspec Specification Link
Maintenance Brochure
Colour Guide
Determine your wind zone
Installation Guide
Thermospan Design Guide
Masterspec Links
What is Codemark
250MM THICK THERMOSPAN ACHIEVES R6.6 this exceeds the minimum R-value requirement to comply with H1-Energy Efficiency
DOWNLOAD YOUR H1 COMPLIANCE GUIDE HERE
Manufactured in Auckland - Max length 24m. Please note Lengths are restricted by transportation to site.
External Facing: 0.59mm CP Grade Prepainted Galvanised Steel or COLORSTEEL® ENDURA® or COLORSTEEL® MAXX®. The correct steel is dependent on the environmental category and corrosion zone, please consult Metalcraft Insulated Panels.
Internal Facing: 0.59mm CP Grade Prepainted Galvanised Steel.
FEATURES AND BENEFITS
ThermoSpan consists of a 0.59mm profiled roofing sheet bonded to an EPS core with a ceiling panel sheet bonded to the underside. The EPS core is treated with a flame retardant additive.
• NZ Made for longer sheet lengths and shorter lead times.
• EPS core treated with a flame retardant additive
• Thermally efficient
• A reduction of wet trades
• Ease of cutting and trimming on site
• Minimal mess on site
• Compatibility with openings and design elements of the building
• NZ Steel - COLORSTEEL® colours for perfect colour match with flashings
CONTACT US
COLORSTEEL® COLOUR OPTIONS
Standard colour is Titania to both sides. All colours are available in COLORSTEEL® ENDURA® and COLORSTEEL® MAXX®. Please note colours below are indicative and we recommend you request a steel colour sample from your nearest Metalcraft Roofing branch. The homeowner should be aware that temperatures of dark colours are higher than those of lighter colours. Darker colours will thermally expand more. Thermal expansion of metal roofs is covered in the MRM Code of Practice. The MBIE document on roof cladding advises that noise from thermal expansion is normal and should be expected. Refer to MBIE -Guide to tolerances, materials and workmanship in new residential construction 2015.
Karaka
Gull Grey
Permanent Green
Mist Green
Lichen
FlaxPod®
Ironsand
Lignite
Desert Sand
Slate
Grey Friars
New Denim Blue
Thunder Grey
Sandstone Grey
Cloud
Titania
Scoria
Pioneer Red
Windsor Grey
